Connect to a heavy gauge metal part of the frame or engine block.ī) For positive-grounded systems, connect the NEGATIVE (BLACK) clamp to the NEGATIVE ungrounded battery post and the POSITIVE (RED) clamp to the vehicle chassis or engine block away from the battery. Do not connect the clamp to the carburetor, fuel lines or sheet-metal body parts. Never allow red and black clamps to touch each other or another common metal conductor - this could cause damage to the unit and/or create a sparking/explosion hazardĪ) For negative-grounded systems, connect the POSITIVE (RED) clamp to the POSITIVE ungrounded battery post and the NEGATIVE (BLACK) clamp to the vehicle chassis or engine block away from the battery.When using this unit close to the vehicle’s battery and engine, stand the unit on a flat, stable surface, and be sure to keep all clamps, cords, clothing and body parts away from moving vehicle parts.This can cause dangerous sparks, power arcing and/or explosion. Always store battery clamps when not in use.Jump-start procedures should only be performed in a safe, dry, well-ventilated area.Do not wear vinyl clothing when jump-starting a vehicle when jump-starting a vehicle, friction can cause dangerous static-electrical sparks.A lead acid battery can produce a short circuit current high enough to weld a ring, or similar metal object, to skin, causing a severe burn. Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead acid battery.Never smoke or allow a spark or flame in vicinity of vehicle battery, engine or power station.Have plenty of fresh water and soap nearby in case battery acid contacts skin.Be aware of first aid procedures in case of accidental contact with battery acid. Always have protective eyewear when using this product: contact with battery acid may cause blindness and/or severe burns.When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency.Before jump-starting, read the vehicle’s owner’s manual to confirm that external-starting assistance is suitable. Vehicles that have on-board computerized systems may be damaged if vehicle battery is jumpstarted.NEVER ATTEMPT TO JUMP-START OR CHARGE A FROZEN BATTERY.
TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE: Make sure all switches are in the OFF position before connection to a power source or load. All Power switches should be in the OFF position when the unit is charging or not in use.To recharge this unit, use only the built-in AC Charger.You cannot overcharge the unit using the AC charging method. Fully charge unit with a household extension cord (not supplied) for a full 24 hours before using for the first time. IMPORTANT: This unit is delivered in a partially charged state.SPECIFIC SAFETY INSTRUCTIONS FOR CHARGING THIS UNIT User care Black+Decker J312B BATTERY JUMP-STARTER Black+Decker J312B BATTERY JUMP-STARTER - Use Manual - Use Guide PDF.
0 kommentar(er)
